1. Towline cable laying is not distorted, that can not untie the cable from one end of the cable reel or cable reel, but should rotate the cable reel or cable reel to expand, if necessary, the cable expands or is suspended. Cables for the property can only be obtained directly from the cable reel.
2. The required minimum bend radius attention. For information, you may be looking at the selection table.
3. Cable Required lax laid side by side in the towline, the arrangement as separate, separate or penetrate bracket parting vague in neutral with the spacer, the gap between the towline the cable should be at least 10% of the cable diameter.
4. The cable towline must not touch each other or be trapped together.
5. The two cables are necessary fixed, or at least in the sports end towline required fixed. Move away from the point of common flexible cable towline end interval should be 20-30 times the cable diameter.
6. Make sure that the cable bending radius completes the move that can not be forced to move. Such cables to each other, or with the installation guide, may be relatively mobile. After a period of operation, it is best to check the position of the cable. After the move is necessary to check the sliding stop.
7. If the towline broke, its cable also needs change, damage due to excessive stretching formation can not be avoided.
Copyright ? 2010 - 2025 zmscable.com All Rights Reserved.
