Factory transportation: When the product is loaded into the transportation vehicle, it needs to be warm and protective.
For example, use a closed transport to prevent direct exposure of the product; put a layer of cushion on the product, such as bedding or other soft foam; handle gently when loading, do not rough loading, and avoid bending the product big.
When arriving at the destination or at the construction site, it is best for the product supplier to station personnel for supervision to prevent rough operation when the product is unloaded.
Storage: It is best to store the product indoors, and at the same time put a layer of insulation on the stored surface, such as wood, bedding, foam, etc. To prevent the product from being exposed to moisture, pay attention to prevent the product from directly contacting the ground.
The phenomenon of scratching the outer skin of the cable is handled with care.
When the product is laid and installed: It is best to choose to work in the middle and afternoon when the temperature is warmer. If there are conditions, use the heater and other equipment to give the product a "hot warm-up" before use, so that the product can reach the best performance state.
If it is buried, a protective layer such as cloth or foam can be placed in the cable trench.
Copyright ? 2010 - 2025 zmscable.com All Rights Reserved.
