In the previous article, we present ZMS cable's strict quality control procedure for wire braid.
This article is to present the inspection methods and rules for braid.
1. The wire no. And diameter should be counted and measured at both the beginning and end of braiding.
2. The braided density should be inspected with measuring methods to comply with GB/T 9330.
Pitch is measured with a vernier caliper, the woven pitch is the straight line distance of the woven wire braid a circular.
3. Braided appearance should be inspected by eyes and by hands.
All items should be inspected at the initial boot or when the new model is replaced.
The procedure should comply with the regulation in table 1 with the lowest value of the specified. In conditions the permit can increase the frequency of inspection.
Copyright ? 2010 - 2025 zmscable.com All Rights Reserved.
