The high-voltage cable is a special cable used in special occasions. When the high-voltage cable is used, it must be strictly observed in accordance with its special use. If an accident occurs in the high-voltage cable, the consequences are very serious. If the high-voltage cable enters the water, under the action of the electric field, aging will occur, resulting in cable breakdown. Very much the use of cables brings some harm.
After the high-voltage cable is sharp, it is very difficult to clean it. There is no corresponding configuration equipment. In the actual application of the cable, if the cable is gold water, if the cable end is filled with water, you can cut off the front end of the cable by a few meters. If the entire cable has been flooded, it can only be scrapped. Therefore, the cable is mainly based on the prevention of water ingress into the cable. It should be based on prevention.
1. The high-voltage cable head should be sealed. If it is sawn off the cable end, whether it is stacked or laid, it should be sealed with plastic, which can prevent moisture from infiltrating.
2. After the wire is laid, the cable head should be made in time, which can effectively prevent water from entering the cable head.
3. There is also the need to choose a good quality cable when purchasing the cable, so that the quality of the cable is good, which can effectively prevent the cable insulation aging and other conditions.
4. Since the insulation impurities and pores in the cable are the starting point movement of the water wind, the cable must be regularly maintained and maintained during use, because the cable is good for preventing water tree aging. The relationship.
Copyright ? 2010 - 2025 zmscable.com All Rights Reserved.
